Old 04-19-2004, 05:14 AM   #1
Als_Holographic_Helper
Control Room Technician
 
Als_Holographic_Helper's Avatar
 
Join Date: Apr 2004
Posts: 103
Default have you made a replica Handlink?

Hi!

If you have made a replica handlink then send a picture here!
(If you want to say what its made from)

I made a handlink out of Perler/Hama beads. these are tiny beads that you put on a "peg board" and iron. (the white parts glow in the dark but it doesnt flash or beep.)




Jeddie.
__________________
Als_Holographic_Helper is offline   Reply With Quote
Old 06-05-2008, 04:40 PM   #2
NeuroMason
Control Room Technician
 
NeuroMason's Avatar
 
Join Date: Feb 2007
Location: USA
Posts: 152
Default



again... one of mine.. this one is gonna be my best one yet!
__________________
NeuroMason is offline   Reply With Quote
Old 06-11-2008, 02:13 PM   #3
Als_Holographic_Helper
Control Room Technician
 
Als_Holographic_Helper's Avatar
 
Join Date: Apr 2004
Posts: 103
Default

Wow! That looks even better than your other ones! Any ideas on the price of these ones (If you are planning to sell these )

A more up to date handlink replica of mine can be found here:
http://www.quantumleap-alsplace.com/forum/showthread.php?t=1811
__________________
~ Jeddie
Als_Holographic_Helper is offline   Reply With Quote
Old 06-12-2008, 03:00 AM   #4
NeuroMason
Control Room Technician
 
NeuroMason's Avatar
 
Join Date: Feb 2007
Location: USA
Posts: 152
Default

Thanks!! Yeah.. The one im making now is just unreal!! Im not trying to brag but it looks like it came right out of the television screen and landed on my coffee table! lol Im still working on this one though.. ive got more up to date pictures i'll try to put on here in a day or 2. Im installing some L.E.D lights still... its gonna have around 105 L.E.D's!!! Plus im putting a potentiometer on it so you can speed up or slow down the flashing lights just like the show... To answer your question, i can make one of these just like it almost anytime but it would cost more than the other ones i make. Its just the detail that goes into this one!! All the way down to polishing the acrylic at the end... Just email me at Neuro_mason@hotmail.com if you want one sometime.
__________________
NeuroMason is offline   Reply With Quote
Old 06-12-2008, 03:14 AM   #5
NeuroMason
Control Room Technician
 
NeuroMason's Avatar
 
Join Date: Feb 2007
Location: USA
Posts: 152
Default



Here is a pic of it after i drilled for the L.E.D lights and installed the upper right corner lights... I actually now have 5 blocks lighting up but have a ways to go to finish the rest...
__________________
NeuroMason is offline   Reply With Quote
Old 06-15-2008, 09:47 PM   #6
Sam's Crow
Assistant to Gooshie
 
Sam's Crow's Avatar
 
Join Date: Jun 2008
Location: Liverpool, England
Posts: 488
Default

I reckon yours is going to look very realistic once it's done, NeuroMason.
__________________
Sam's Crow is offline   Reply With Quote
Old 06-17-2008, 12:03 AM   #7
NeuroMason
Control Room Technician
 
NeuroMason's Avatar
 
Join Date: Feb 2007
Location: USA
Posts: 152
Default

Thank you... im trying very hard to be detailed with it but its just gonna take some time.. i just put the side walls on it today and the back pieces of acrylic.. its coming along now... i just have to install the potentiometer, side switch with blue button and then it will be pretty much done... here are a couple of pics from today...






__________________
NeuroMason is offline   Reply With Quote
Old 06-17-2008, 03:57 AM   #8
Sam's Crow
Assistant to Gooshie
 
Sam's Crow's Avatar
 
Join Date: Jun 2008
Location: Liverpool, England
Posts: 488
Default

Excellent.
__________________
Sam's Crow is offline   Reply With Quote
Old 06-17-2008, 01:13 PM   #9
Als_Holographic_Helper
Control Room Technician
 
Als_Holographic_Helper's Avatar
 
Join Date: Apr 2004
Posts: 103
Thumbs up

Wow!! :O Really coming together now!
__________________
~ Jeddie
Als_Holographic_Helper is offline   Reply With Quote
Old 06-17-2008, 02:49 PM   #10
NeuroMason
Control Room Technician
 
NeuroMason's Avatar
 
Join Date: Feb 2007
Location: USA
Posts: 152
Default

Thank you,, yeah.. i just have to add some detail stuff to it when i get the chance...
__________________
NeuroMason is offline   Reply With Quote
Old 06-21-2008, 12:21 PM   #11
leaper
Control Room Technician
 
Join Date: May 2006
Posts: 180
Default

this little gizmo looks like a time mashine
__________________
leaper is offline   Reply With Quote
Old 06-22-2008, 05:03 PM   #12
NeuroMason
Control Room Technician
 
NeuroMason's Avatar
 
Join Date: Feb 2007
Location: USA
Posts: 152
Default

ha ha... yeah.. its coming along... i guess next thing i do is take on making a replica "Genisis Handlink".... I believe i know how to do that now...
__________________
NeuroMason is offline   Reply With Quote
Old 06-23-2008, 06:56 AM   #13
Sam's Crow
Assistant to Gooshie
 
Sam's Crow's Avatar
 
Join Date: Jun 2008
Location: Liverpool, England
Posts: 488
Default

I should start making one, but haven't got the time.
__________________
It's Monday morning again,
Or still? It's hard to tell the difference.
Sam's Crow is offline   Reply With Quote
Old 06-23-2008, 03:30 PM   #14
NeuroMason
Control Room Technician
 
NeuroMason's Avatar
 
Join Date: Feb 2007
Location: USA
Posts: 152
Default

yeah it can be time consuming... im gonna be putting this one in a display case and i'll put a Genesis Handlink with it once i make one. I'll probably even make one like Zoey used (evil leaper's hologram)
__________________
NeuroMason is offline   Reply With Quote
Old 06-24-2008, 06:22 AM   #15
Sam's Crow
Assistant to Gooshie
 
Sam's Crow's Avatar
 
Join Date: Jun 2008
Location: Liverpool, England
Posts: 488
Default

What season did they introduce the Evil Leapers anyway?
__________________
It's Monday morning again,
Or still? It's hard to tell the difference.
Sam's Crow is offline   Reply With Quote
Old 06-24-2008, 10:37 AM   #16
ohboy
Junior Leaper
 
ohboy's Avatar
 
Join Date: May 2008
Location: Northern California
Posts: 1,383
Default

I havn't seen the entire series, but I think that they appear in season 5 or 4. I do know for a fact that they are not in season 1 or 2, but that's as far as you can quote me (I think I read somewher they come in season 5).
__________________
"Do not forget to entertain strangers, for by doing some have unwittingly entertained angels."
Dr. Wily is a registered trademark of Capcom, and I don't own the rights to it in anyway, nor do I profit from the avatar.
ohboy is offline   Reply With Quote
Old 06-24-2008, 01:34 PM   #17
NeuroMason
Control Room Technician
 
NeuroMason's Avatar
 
Join Date: Feb 2007
Location: USA
Posts: 152
Default

Yeah, i think it was season 4 and once in season 5... seems like they introduced the evil leaper for the first time when Sam Leaped into Jimmy Lemont for the second time..... then again in the 5th season.... i think
__________________
NeuroMason is offline   Reply With Quote
Old 06-24-2008, 03:53 PM   #18
isz
Assistant to Gooshie
 
Join Date: Jun 2007
Location: Jerusalem,Israel
Posts: 441
Default

It was in Season 5 of QL,however,in season 3 we had "Devil Al".
__________________
isz is offline   Reply With Quote
Old 06-24-2008, 05:58 PM   #19
ohboy
Junior Leaper
 
ohboy's Avatar
 
Join Date: May 2008
Location: Northern California
Posts: 1,383
Default

I usually read up on the brief plot synthesis that comes with the TV listings on the internet, and I read up on that particular episode. Is the Devil (who is mentioned in vague terms during the first two seasons) considered an "evil leaper", since he puts wrong what once went right, or not because he is not human and not part of the other project?

On another point, I just wanted to tell you how well made those handlinks were. They must have taken some considerable time and effort to make them that true to the series. In the words of countless eBay reviews, "A+++++++"
__________________
"Do not forget to entertain strangers, for by doing some have unwittingly entertained angels."
Dr. Wily is a registered trademark of Capcom, and I don't own the rights to it in anyway, nor do I profit from the avatar.
ohboy is offline   Reply With Quote
Old 06-24-2008, 06:28 PM   #20
NeuroMason
Control Room Technician
 
NeuroMason's Avatar
 
Join Date: Feb 2007
Location: USA
Posts: 152
Default

Thank you very much my friend... Im honestly not planning on making them very much longer though... im making one other one for a guy... its gonna be very nice but not this nice!! lol If i had to sale this one id have to have at least $700.00 for it!!!! Im talking major work... But i CAN make one very nice for around 300.00
__________________
NeuroMason is offline   Reply With Quote
Old 06-25-2008, 06:58 AM   #21
Sam's Crow
Assistant to Gooshie
 
Sam's Crow's Avatar
 
Join Date: Jun 2008
Location: Liverpool, England
Posts: 488
Default

I agree with ohboy that must have taken some work to get so far. I want to congraulate you on how well you have done. *thumbs up*
__________________
It's Monday morning again,
Or still? It's hard to tell the difference.
Sam's Crow is offline   Reply With Quote
Old 06-25-2008, 05:57 PM   #22
NeuroMason
Control Room Technician
 
NeuroMason's Avatar
 
Join Date: Feb 2007
Location: USA
Posts: 152
Default

Hey i really appreciate the kind words... Thank you all... Pure dedication and love for the show since i was a young kid is what has helped me to make one of these... Now i just need to find a way to either make it out to the convention and get a picture with Deal Stockwell and have him hold it and sign it! im not sure if im gonna be able to make it though.....
__________________
NeuroMason is offline   Reply With Quote
Reply

Thread Tools

Forum Jump


All times are GMT -4. The time now is 05:16 AM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Copyright 2000 - 2016 Al's Place Quantum Leap Fan Site | 4.8.15.16.23.42