Ziggy "Gummy Bear" Handlink

[Al_Calavicci]

Originally Posted by Lightning McQueenie

Why not ask Monsieur Dorleac if he has that pin? You might be able to get the original

I thought Al's Starbright project badge was in Deborah Pratts personal collection. I remember seeing it posted here with her Handlink from the Quantum Leap convention.

[feldon30]

Originally Posted by Al_Calavicci

Hi,I've been going through "The Jetsons" episode by episode and will post time indexs for all the sound effects. It's just taking some time

Looking forward to this! Even if you have one episode's worth, I will download that episode and compare.

[Replica Props]

Finished the static version.

[feldon30]

The above photos are the culmination of 12 years of work off-and-on by Replica Props and represents, as close as possible, the version 11* Handlink as seen in nearly every episode of Quantum Leap during seasons 4 and 5.

The electronics have been a 2 year journey and I have just ordered what I hope will be the production Handlink v11 PCB which will provide accurate blinking lights with adjustable speed, remastered sound effects triggered by capacitive touch, and shock-triggered sounds as Al would express frustration with the Handlink. I hope everyone is satisfied with the design. Here is a video of the revision 2 board in a prototype case:



*Most episodes also showcased version 10 (introduced in the latter half of season 3) which has a different rivet arrangement, an additional yellow half block in the upper left corner, and slightly less sophisticated blinking of the upper middle green blocks.

[QL Nut]

Originally Posted by Al_Calavicci

I liked Zoey's handlink more than the one Thames had.
As far as recognition,I think serious fans of the show would recognize it,but probably not anyone else.

One thing I've noticed is that Zoé's handlink is actually a previously rejected design for Al's handlink, by Bellisario. I noticed this from screenshots of the "Sciography" documentary segment on the handlink where the concept art for all the rejected versions was shown.

Zoé's handlink appears to consist of only two colors of acrylic (orange/magenta and clear) with no LEDs or electronics whatsoever and minimal black decals for the "buttons." I would love to own a version of this. I would imagine it would be easier to produce than the Gummi and Calculator versions.

As for the post production sound effects for the episodes, they were few and far between. Almost not worth it to figure out a way to add any, IMO.

[feldon30]

Originally Posted by QL Nut

One thing I've noticed is that Zoé's handlink is actually a previously rejected design for Al's handlink, by Bellisario. I noticed this from screenshots of the "Sciography" documentary segment on the handlink where the concept art for all the rejected versions was shown.

Zoé's handlink appears to consist of only two colors of acrylic (orange/magenta and clear) with no LEDs or electronics whatsoever and minimal black decals for the "buttons." I would love to own a version of this. I would imagine it would be easier to produce than the Gummi and Calculator versions.

As for the post production sound effects for the episodes, they were few and far between. Almost not worth it to figure out a way to add any, IMO.

Good eyes! I noticed this too in Sciography.

So I'm piddling with the idea of doing Zoey's handlink and even sounds, although it would be tricky as you can imagine. I've got most of the sounds captured. The tricky part will be getting capacitive touch to work on the fluorescent orange surface without huge visible wires.

[alsplacebartender]

Originally Posted by feldon30

Good eyes! I noticed this too in Sciography.

So I'm piddling with the idea of doing Zoey's handlink and even sounds, although it would be tricky as you can imagine. I've got most of the sounds captured. The tricky part will be getting capacitive touch to work on the fluorescent orange surface without huge visible wires.

Awesome!

[QL Nut]

Originally Posted by feldon30

Good eyes! I noticed this too in Sciography.

So I'm piddling with the idea of doing Zoey's handlink and even sounds, although it would be tricky as you can imagine. I've got most of the sounds captured. The tricky part will be getting capacitive touch to work on the fluorescent orange surface without huge visible wires.

Why not simply make a 'static' version like what Replica Props did with the Gummi Handlink? It would actually be more accurate anyway. Could always come out with an enhanced version later.